Start delay and overrun time

To adjust, remove the housing cover and then put it back on.

The first time the setting button is pressed, the currently set value is displayed. During operation the LEDs are off.

For delivery status → Product information.

  1. Carefully remove the housing cover with the design cover.

11

Setting button for start delay

12

Setting button for overrun time

Setting the start delay:

  1. Press the left setting button repeatedly, until the LED of the desired start delay time lights up. Wait until the LED flashes twice and goes out. The value is now saved.

With the H and KH variants, the start delay for the light switch can only be set when the light switch is on.

Setting overrun time:

  1. Press the right setting button repeatedly, until the LED of the desired overrun time lights up. Wait until the LED flashes twice and goes out. The value is now saved.

The settings take effect starting with the next switching process (sensor, light switch).

  1. Carefully press the housing cover/design cover onto the housing, until they snap into place.